OCCUPATIONAL HEALTH
S80.69
New 3-05
Environmental Health and Safety
335-3041
PDF link
OVERVIEW
Washington State University has developed the chemical hygiene plan to aid units in promoting a high standard of health and safety. The plan applies to all University laboratories. (See the definition of "laboratory" below.)
Environmental Health and Safety (EH&S) publishes the general WSU chemical hygiene plan in the form of the Laboratory Safety Manual (LSM) to provide valuable and accessible information to all personnel working in University laboratories.
However, since each laboratory is unique in purpose and function, the LSM lacks laboratory-specific details that only the principal investigator or supervisor can provide. The principal investigator or supervisor responsible for the laboratory-specific processes must supply additional details on the required yellow informational pages. See below.
If a paper copy of the LSM is not available, view the University's chemical hygiene plan by going to the EH&S Laboratory Safety Manual web site at:
RESPONSIBILITIES
Department Chair/Director
The department chair or director:
- Is responsible for ensuring that this policy is implemented.
- Is responsible for the safety of all employees, students, and visitors in his or her areas of control.
- Reviews the control methods used by the principal investigator or supervisor.
- Ensures that the department maintains a file of required authorizations to use restricted or regulated hazardous chemicals.
- Reviews all accident reports.
- Ensures that appropriate corrections are made.
Principal Investigator/Faculty/Supervisor
The principal investigator, faculty member, or laboratory supervisor:
- Is the chemical hygiene officer for the laboratory(ies).
- Implements the chemical hygiene plan.
- Enforces University laboratory safety rules and establishes specific procedures for the laboratory;
- Trains employees and students in safety procedures.
- Corrects improper work practices.
- Identifies defective environmental conditions which could result in personal injury.
- Develops a positive attitude among employees toward accident prevention.
- Prepares a chemical hygiene plan keyed to the specific needs of each research and teaching activity under his or her direction.
- Reviews and evaluates the effectiveness of the chemical hygiene plan at least annually, and updates as necessary.
- Consults with the EH&S Lab Safety Officer with questions, as needed, to ensure correct and adequate development of the plan.
- Investigates and reports accidents, injuries, and occupational illnesses to Human Resource Services and to the department chair or director (see S25.20).
- Completes Supervisor's Accident Investigation Reports, if applicable. See S25.25.
- Initiates corrective action to ensure maximum safety for his or her employees.
Employee/Student
The employee or student:
- Knows and complies with safety guidelines and policies required for the task assigned.
- Reports unsafe conditions to the principal investigator, faculty member, immediate supervisor, or EH&S.
- Reports accidents, injuries, and occupational illnesses to immediate supervisor for evaluation and possible investigation.
- Utilizes fume hoods, laboratory safety devices, and personal protective equipment properly as trained. See also S30.10.
Environmental Health and Safety (EH&S)
Environmental Health & Safety (EH&S):
- Promotes programs needed for compliance with health and safety regulations and for the protection of the health and safety of students, faculty, staff, and the surrounding community.
- Provides a University Laboratory Safety Officer, who assists department chairs, directors, principal investigators, faculty, and laboratory supervisors in the implementation and maintenance of the individual laboratory chemical hygiene plans.
- Cooperates with academic and service units by identifying health and safety hazards.
- Evaluates and reports on the status of compliance with health and safety regulations.
- Recommends and implements necessary modifications to the "generic" University chemical hygiene plan/Laboratory Safety Manual.
- Records, evaluates, and reports laboratory accidents and laboratory incidents.
- Develops and maintains training resources.
- Conducts training courses in laboratory safety.
CHEMICAL HYGIENE PLAN
Components
The Chemical Hygiene Plan must contain:
- Standard operating procedures for use of hazardous chemicals.
- Designated area provisions.
- Descriptions of or provisions for fume hoods and other protective equipment.
- Provisions for employee information, training, and medical monitoring and examination.
- Evaluation criteria the employer uses to reduce exposure.
- Prior approval provisions for special laboratory projects.
- Designation of person(s) responsible for implementation of the chemical hygiene plan.
- Any extra protection provisions for work with particularly hazardous substances.
Implementation
EH&S provides the basic elements of a general or "core" chemical hygiene plan in the form of a Laboratory Safety Manual. The manual includes the established policies of Washington State University and various regulatory agencies.
Each laboratory must provide additional information to make this manual relevant to the area. The principal investigator or laboratory supervisor must complete the required yellow pages by answering the questions or prompts on each page. See the Laboratory Safety Manual to obtain the yellow pages.
There is no prescribed way to fill out these pages. If information is already written concerning the questions or prompts, or if this information is available on a computer, attach copies or originals to the yellow pages. This information will be unique to the laboratory. It may be kept as an integral part of the chemical hygiene plan or filed under Section VI: Laboratory Specific Information provided in the Laboratory Safety Manual.
The yellow pages that must be completed are as follows:
- Site specific responsibility for chemical hygiene and safety
- Specific information on your department's chemical receiving, storing, or dispensing procedures
- Standardized secondary labeling system for your laboratory
- Description of material safety data sheets (MSDSs) and other references available in the laboratory
- Laboratory floor plan
- Location of the laboratory spill kit and special instructions for clean-up and emergency response
- Site specific ventilation information
- Required elements of standard operating procedures
The laboratory must complete and record these pages in the plan or manual in order to be in compliance with the regulations mandated by the state of Washington's "Occupational Exposures to Hazardous Chemicals in Laboratories" standard. (WAC 296-802)
Assistance
Contact EH&S at 335-3041, if assistance is needed with the implementation of the chemical hygiene plan.
Accessibility
The department must make the chemical hygiene plan readily available to all employees and students in the laboratory. The department must also provide the plan on request to EH&S staff and Washington State Department of Labor and Industries (WDLI) representatives.
The area for which the chemical hygiene plan is written may be adjoining rooms, a single room, or an area within a room as long as the area is readily available (see definition below).
The spatial definition of a laboratory is left to the discretion of the individual who ultimately takes responsibility for the safety of all employees who work within that area. This individual is to be a principal investigator (PI) or a laboratory supervisor.
DEFINITIONS
Laboratory means a facility where the laboratory use of hazardous chemicals occurs. It is a workplace where relatively small quantities of hazardous chemicals are used on a nonproduction basis.
For the purposes of this policy, laboratory activities are research and quality control activities. "Dry" laboratories such as computer labs are not covered by this policy.
Laboratory Use of Hazardous Chemicals
Laboratory use of hazardous chemicals means the handling or use of hazardous chemicals in which all of the following conditions are met:
- Chemical manipulations are carried out on a laboratory scale (see definition below);
- Multiple chemical procedures or chemicals are used;
- Procedures involved are not part of a production process, nor in any way simulate a production process; and
- Protective laboratory practices and equipment are available and in common use to minimize the potential for employee exposure of hazardous chemicals.
Laboratory Scale
Laboratory scale means work with substances in which the containers used for reactions, transfers, and other handling of the substances are designed to be easily and safely manipulated by one person.
Laboratory scale excludes those workplaces whose function is to produce commercial quantities of materials.
Readily available means accessible to all laboratory staff at any time during the work period, day or night.
Hazardous Chemical
Hazardous chemical means a chemical for which there is statistically significant evidence, based on at least one study conducted in accordance with established scientific principles, that acute or chronic health effects may occur in exposed employees.
The term "health hazard" includes chemicals that are carcinogens, toxic or highly toxic agents, reproductive toxins, irritants, corrosives, sensitizers, hepatotoxins, nephrotoxins, neurotoxins, agents which act on the hematopoietic systems, and agents which damage the lungs, skin, eyes, or mucous membranes.
Particularly Hazardous Substance
Particularly hazardous substances include select carcinogens, reproductive toxins, and substances that have a high degree of acute toxicity.