It's simple: to get KUGR on cable, first find your FM antenna at
the back of your stereo, you will want to connect this to your cable
coming from the wall. For best results, you will want a Cable/FM
splitter. This will divide your cable signal into separate signals
for TV and FM. You can find one of these easily in the Board of
Directors office at KUGR. They are only $1.00! You may also need
an extra coaxial cable, or a two-pronged UHF adapter. Just read
through the directions and take a look at your stereo's FM antenna
to determine which of these parts you may need.
First, unplug
all devices including your TV, VCR and stereo. Take the cable running
from the wall and detach it from your TV or VCR. Now attach this
cable to the end of the splitter with one connection. You have now
split your cable signal. Depending on what type of FM antenna your
stereo has, you will need to attach the cable differently. See diagrams
below for the different ways to connect to either a wire or steel
antenna. If your stereo does not have an antenna, look for a screw
or port labeled "300 ohms" and attach the cable there.
KUGR broadcasts on 95.1 If you have any questions about KUGR or
hooking up to cable radio, call KUGR at 335-5042.
Click
here for a printable copy of these instructions.
top
|